M3 CSL Wiki - User contributions [en]

NLA Parts

2020-07-10T11:59:29Z

NZ M3:

'''NLA Parts'''

Current NLA or zero or extremely low stock items with no production dates (No Longer Available new from BMW) parts as of July 2020

1. Carbon Roof - 41007895382

2. Light weight Pollen tray - 64317895939

3. RHD carbon centre console - 51167896359

4. Rear seat headrests - 52207896794

5. Front seat coverings - 52107919184

6. Front seat cushions - 52107919183 and 52107919181 and 52107919266

7. Full front seats complete - 52100031830 and 52100302831

8. Seat rails - 52107895957 and 52107895958

9. Rear seat base - 52207896809

10. Rear seat cover - 52207896800

11. Body Skeleton RHD and LHD

12. Thinner Rear glass - 51317895441

13. Rear seat support bracket cover - 52207896962

14. Engine DME - 12147834981

15. Original Map sensor - 13627833561

16. Engine wiring harness - 12517833336

17. Main bumper wiring harness - 61127833671

18. RHD steering rack - 32132282647

19. Non AC control panel

20. Rear diffuser - 51127897863

21. Front intake muffler pipe - 13717896774

22. Front carbon door panels - 51417895581 and 51417895582

23. Rear carbon door panels - 51437895580 and 51437895579

24. M3 CSL display number plates - 81850306797

25. CSL Baseball cap - 80300145434

26. M3 CSL Keyring - 80540301625

DIY & How to

2020-07-10T08:05:11Z

NZ M3:

Currently the major technical reference area for all things CSL is [http://www.cslregister.com/forum/forumdisplay.php?f=16 ''HERE''] on the CSL Register.

Select items:<br/>
[http://www.cslregister.com/forum/showthread.php?t=14786 Alternative MAP sensor] <br/>
[http://www.cslregister.com/forum/showthread.php?t=15199 Bumper Wiring Conversion]

'''DIY Items'''

[[#Airbox Removal]]<br/>
[[#Next1]]<br/>
[[#Next2]]<br/>
[[#Next3]]<br/>

----
<div id="Airbox Removal">Airbox (Outer part) Removal</div>

''For air filter change or manual oil dipstick access''

For those that have never done this, it really is easy:

Leave the strut brace on for now, as it is something to lean on.
Twist the spring loaded clips on the cover of the cabin filter so they pop up.

Lift up and slide out from under the back rubber (may need a little tug, as the rubber grips it).

Lift up and slide out the cabin filter.

This will then reveal four T30 torx head screws along the back.

Remove those (being careful not to drop the outer two down the drainage holes😛).

Unclip front of cable tray cover and remove. Pull cables out of the tray.

Lift up and pull the cabin filter housing out of the out of the way.

Remove electrical connectors from the airbox one on flap and one on the opposite side. To do this you squeeze the metal spring clip inwards and once fully pressed as far in as it will go, give a gentle tug👍.

Now remove strut brace, as you won’t need to lean on it any more (13mm socket).

Unscrew the four T25 torx on top of the airbox.

Everything is now ready to come apart. The airbox has to be lifted up as there are location pins on the bottom.

Be careful not to scratch it on the wires at the back and also I found it easier to move the SMG reservoir out of the way (just pull upwards and tie it with string so it is out of the way and is not hanging upside down (as the lids leak🤣).

You will then see the air filter that is obvious on how to remove.<br/>
<gallery>
Image: CSL_Dipstick00.jpg
Image: CSL_Dipstick01.jpg
</gallery>

And then all will be revealed: (you can also get to the dipstick and check the oil - it requires a good tug to pop it out AND a firm push to click it back in).

----
<div id="Next1">Next...</div>
----
<div id="Next2">Next...</div>
----
<div id="Next3">Next...</div>

DIY & How to

2020-07-10T08:04:21Z

NZ M3:

Currently the major technical reference area for all things CSL is [http://www.cslregister.com/forum/forumdisplay.php?f=16 ''HERE''] on the CSL Register.

Select items:<br/>
[http://www.cslregister.com/forum/showthread.php?t=14786 Alternative MAP sensor]
[http://www.cslregister.com/forum/showthread.php?t=15199 Bumper Wiring Conversion]

'''DIY Items'''

[[#Airbox Removal]]<br/>
[[#Next1]]<br/>
[[#Next2]]<br/>
[[#Next3]]<br/>

----
<div id="Airbox Removal">Airbox (Outer part) Removal</div>

''For air filter change or manual oil dipstick access''

For those that have never done this, it really is easy:

Leave the strut brace on for now, as it is something to lean on.
Twist the spring loaded clips on the cover of the cabin filter so they pop up.

Lift up and slide out from under the back rubber (may need a little tug, as the rubber grips it).

Lift up and slide out the cabin filter.

This will then reveal four T30 torx head screws along the back.

Remove those (being careful not to drop the outer two down the drainage holes😛).

Unclip front of cable tray cover and remove. Pull cables out of the tray.

Lift up and pull the cabin filter housing out of the out of the way.

Remove electrical connectors from the airbox one on flap and one on the opposite side. To do this you squeeze the metal spring clip inwards and once fully pressed as far in as it will go, give a gentle tug👍.

Now remove strut brace, as you won’t need to lean on it any more (13mm socket).

Unscrew the four T25 torx on top of the airbox.

Everything is now ready to come apart. The airbox has to be lifted up as there are location pins on the bottom.

Be careful not to scratch it on the wires at the back and also I found it easier to move the SMG reservoir out of the way (just pull upwards and tie it with string so it is out of the way and is not hanging upside down (as the lids leak🤣).

You will then see the air filter that is obvious on how to remove.<br/>
<gallery>
Image: CSL_Dipstick00.jpg
Image: CSL_Dipstick01.jpg
</gallery>

And then all will be revealed: (you can also get to the dipstick and check the oil - it requires a good tug to pop it out AND a firm push to click it back in).

----
<div id="Next1">Next...</div>
----
<div id="Next2">Next...</div>
----
<div id="Next3">Next...</div>

NLA Parts

2020-07-10T07:25:27Z

NZ M3:

NLA Parts

2020-07-10T07:16:38Z

NZ M3:

NLA Parts

2020-07-10T07:16:05Z

NZ M3:

'''NLA Parts'''

Current NLA or zero stock items with no production dates (No Longer Available new from BMW) parts as of July 2020

1. Carbon Roof - 41007895382

2. Light weight Pollen tray - 64317895939

3. RHD carbon centre console - 51167896359

4. Rear seat headrests - 52207896794

5. Front seat coverings - 52107919184

6. Front seat cushions - 52107919183 and 52107919181 and 52107919266

7. Full front seats complete - 52100031830 and 52100302831

8. Seat rails - 52107895957 and 52107895958

9. Rear seat base - 52207896809

10. Rear seat cover - 52207896800

11. Body Skeleton RHD and LHD

12. Thinner Rear glass - 51317895441

13. Rear seat support bracket cover - 52207896962

14. Engine DME - 12147834981

15. Original Map sensor - 13627833561

16. Engine wiring harness - 12517833336

17. Main bumper wiring harness - 61127833671

18. RHD steering rack - 32132282647

19. Non AC control panel

20. Rear diffuser

21. Front intake muffler pipe

NLA Parts

2020-07-09T22:56:54Z

NZ M3:

NLA Parts

2020-07-09T22:55:35Z

NZ M3:

'''NLA Parts'''

Current NLA or zero stock items with no production dates (No Longer Available new from BMW) parts as of July 2020

1. Carbon Roof - 41007895382
2. Light weight Pollen tray - 64317895939
3. RHD carbon centre console - 51167896359
4. Rear seat headrests - 52207896794
5. Front seat coverings - 52107919184
6. Front seat cushions - 52107919183 and 52107919181 and 52107919266
7. Full front seats complete - 52100031830 and 52100302831
8. Seat rails - 52107895957 and 52107895958
9. Rear seat base - 52207896809
10. Rear seat cover - 52207896800
11. Body Skeleton RHD and LHD
12. Thinner Rear glass - 51317895441
13. Rear seat support bracket cover - 52207896962
14. Engine DME - 12147834981
15. Original Map sensor - 13627833561
16. Engine wiring harness - 12517833336
17. Main bumper wiring harness - 61127833671
18. RHD steering rack - 32132282647
19. Non AC control panel

CSL differences from stock

2020-07-09T22:50:59Z

NZ M3:

Lightweight modifications resulting in the reduction of 110kg to a weight of 1385kg

Carbon fibre roof (-6kg)<br />
19in wheels (-11kg)<br />
Aluminium bonnet<br />
Removal of sound deadoning under bonnet and above the waistline<br />
Lightweight instrument panel console and carbon fibre door cards<br />
Race bucket seats and lighter rear seats<br />
Carbon fibre composite front and rear bumpers<br />
Composite fibre reinforced boot lid<br />
Paper honeycomb sandwich panel for the internal boot floor<br />
Thinner glass for rear window<br />
Thinner full exhaust construction<br />
Carbon fibre airbox<br />
Camshafts(longer duration slightly lower lift)<br />
New exhaust manifold & lighter exhaust system<br />

MK60 update<br />
SMG Drivelogic update with launch control<br />
MSS 54 HP engine management with different map<br />
360bhp @7900rpm 370nm @4900rpm<br />
Final drive differential ratio reduction to 1:3.62<br />

Faster steering 1:14.5 ratio rack<br />
Wider front track with modified suspension geometry and uniball joints<br />
Front - 1,518mm, Rear - 1,525mm<br />

Aerodynamic modifications resulting a drag coefficient of 0.683<br />
The following downforce changes:<br />
Front: +14kg from the carbon fibre flippers<br />
Rear: +19.5kg due to the rear composite duck tail spoiler<br />

NLA Parts

2020-07-09T22:46:23Z

NZ M3:

'''NLA Parts'''

Current NLA or zero stock items with no production dates (No Longer Available new from BMW) parts as of July 2020

1. Carbon Roof - 41007895382
2. Light weight Pollen tray - 64317895939
3. RHD carbon centre console - 51167896359
4. Rear seat headrests - 52207896794
5. Front seat coverings - 52107919184
6. Front seat cushions - 52107919183 and 52107919181 and 52107919266
7. Full front seats complete - 52100031830 and 52100302831
8. Seat rails - 52107895957 and 52107895958
9. Rear seat base - 52207896809
10. Rear seat cover - 52207896800
11. Body Skeleton RHD and LHD
12. Thinner Rear glass - 51317895441
13. Rear seat support bracket cover - 52207896962
14. Engine DME - 12147834981
15. Original Map sensor - 13627833561
16. Engine wiring harness - 12517833336
17. Main bumper wiring harness - 61127833671